Electric chain hoist for loads from 800 to 10000 kg
Completely innovative, top of the range design, its fluid, contemporary and elegant lines confirm the power of this electric chain hoist. This new generation of EUROCHAIN VR hoists is the result of innovative technology; new materials, new operating concepts, can adapt to each specific need.
Technical characteristics
- New lifting nut concept with intermediate teeth for perfect chain drive
- Torque limiter
- Disk lifting brake
- 3m standard lifting height
- Dual-speed lifting
- Safety electric end of run for up and down position
- IP55 lifting and travelling motor
- Thermal protection on lifting motor
- Tropic-proof protection (lifting and steering – 90 to 95 %)
- Galvanised lifting chain
- Disconnectable command cable
- 2-buttons unit on fixed hoist or push steering carriage
- 4-buttons unit on hoist coupled to electric steering carriage
- «Punch» emergency stop button
- 400V/3Ph/50Hz or 415V/3Ph/50 Hz or 460V/3 Ph/60 Hz power supplyLow voltage 48 V command
- Chain bag
- 70 mm, RAL 7021 epoxy powder paint
- Speed variation on travelling – MS Mode (for hoists with an electric trolley)
- Complies with the CE machine directive
Options available
- Gear limit switch
- Second brake on lifting motor
- Attachment by eyelet (perpendicular) to replace the upper hook
- Automatic closure lifting hook
- Travelling limit switch
- Short headroom trolley
- Trolley for curved track
- Dual-speed travelling trolley carriage (20 & 5 m/min)
- Slow speed travelling trolley (3 to 10 m/min)
- High speed travelling trolley
- Additional button on pendant unit
- Wall-mounted command
- Direct voltage hoist control to replace the low voltage
- Manual brake release
- Rain protection
- Reinforced protection
- Total protection for operation in Zone 22
- Reinforced tropic-proof protection
- Hoist available in a version that complies with CSA standards
Made-to-measure configurations
Available as fixed suspended by hook, hooked to hand operated or geared trolley on I beam, hooked to motorized or hand operated trolley in Eurosystem ALU profile and coupled to motorized trolley on I beam.
